Production and Characterization of Activated Carbon Derived from Costus Afer Leaves (C. afer) for the Adsorption of Methylene Blue Dye from an Aqueous Solution

In this work, Costus afer leaves (C. after) was utilized as an agricultural waste material for the synthesis of activated carbon (AC) used for the adsorption of methylene blue dye from its aqueous solution. The raw material was prepared, chemically activated using KHCO3 with an impregnation ratio of 1:3, and later carbonized at a temperature of 700℃ in an inert N2 atmosphere for 1hour to produce activated carbon. The proximate analysis of the biomass revealed the percentage of ash content, moisture content, volatile matter, and fixed carbon present in the waste biomass. The raw and activated carbon produced were characterized using various tests such as: Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray (EDX), Fourier Transform Infrared-(FTIR) Spectrometry, X-Ray Fluorescence (XRF), and Brunauer-Emmett-Teller (BET). The results revealed that the SBET of the biomass increased from 400m2/g to 600m2/g after activation. Adsorption studies were carried out in batch mode to determine the influencing factors of adsorption with varying adsorbent dosage, contact time, and pH values. The adsorption experiment revealed high adsorption efficiency at an optimum parameter of dosage (0.2g), contact time (10 min), and pH (8) with a 70.58% removal of methylene blue dye. An increase in dosage, contact time, and pH above the optimum parameter leads to a decrease in percentage removal. The adsorption capacity was achieved using adsorption isotherm models like Langmuir and Freundlich. Adsorption of methylene blue validated the Langmuir model with an R2 of 0.999 and a Qm of 11.83 mg/g. These results show that activated carbon prepared from Costus afer leaves constitutes an effective low-cost material for the adsorption of Methylene dye from wastewater.